| Gallery, Projects and General > How to's |
| How to make a internal/external threading tool on your lathe |
| << < (7/8) > >> |
| andyf:
Well, I can see the link, and have just tried it. Below Paul's signature, and above the "Last Edit" line, it says: BD-LatheTools.pdf (100.96 kB - downloaded 204 times.) I don't think that copy will work as a link. If not, you will have to go back to the first post and try to spot it. Andy |
| mzt:
Ah!! Got it! The link to the PDF won't appear unless You've logged in to the forum. Marcello |
| RotarySMP:
Thanks for posting this. Sure looks easier than the internal threading tool I ground out of a normal 8mm HSS-Co Blank. It would be easy enough to file a tip radius while it is still in the lathe, to ensure the correct root radius for a specific thread if desired. For the external thread, you could have used the insert tool and jumped from to this ... |
| Bishop:
Thanks Paul, I finally got around to making one of these tools. I can see making a few more sizes very soon, cheers. Shawn |
| Meldonmech:
Well presented pictures and wright up. Cheers David |
| Navigation |
| Message Index |
| Next page |
| Previous page |