| Gallery, Projects and General > Project Logs |
| Moteur oscillant double effect |
| << < (13/19) > >> |
| Stilldrillin:
Love how you did the base plates Stew! :clap: Don`t mention rugrats...... ::) Severe complications, imminent! David D |
| Brass_Machine:
The plates came out very nice Stew! Super impressed. Eric |
| Bernd:
Have to say Stew, nice idea with sticking those plates togeher with tape. Have to file that one away for later use. Looks like the project is coming along nicely. Bernd |
| sbwhart:
Since getting back from China I've finished of the base girders sorry no pics and started on the displacement lubricator. Decided to fabricate the lubricator up from copper tube as this will save on material, making from solid would just reduce a lot of good material into swarf. These are the bits for the body. I've fitted a bleed nipple into the base so that the water can drained off and the oil top up, without taking the engine off steam. Bits silver soldered together and a trial fitting on the engine to she how they look. Still got to drill the steam hole in the pipe and make some caps, and that all of the bits made for the engines, next job up a bit of bling and set up an assy line. Stew |
| Stilldrillin:
Nice to see this is rolling again Stew! :thumbup: David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |