Gallery, Projects and General > Project Logs
Moteur oscillant double effect
sbwhart:
Thanks Bernd
I don't won't to give you night mares Dave but the next bit requires a jig also. :D
The next bit is the stuffing box come cylinder head thingy :scratch:
Another job with a lot of lathe work.
Turn down a goodly length enough to make 2 or 3 from
Turn down, drill, part off, Turn down, drill, part off, turn down another goodly length repeat repeat repeat.
And you end up with a box of bits.
These are not finished yet I've got to turn the register for the cylinder on the other end, Drill some holes WITH A JIG. and square the flange off, but before I do that I'm going to pick the boiler job up again for a couple of days I hope fingers crossed and all that.
Stew
Stilldrillin:
Stew,
No nightmares, these days..... :thumbup:
I don't miss it one bit! :D
Nice work, again..... :clap:
David D
spuddevans:
Looking good Stew :thumbup:
I'm following this with interest as I have a future build where I may be making between 8-10 cylinders for either a V4 or V8 wobbler. So I am taking note of all your hints/tips/jigs for multiple parts manufacturing.
Tim
Bluechip:
--- Quote from: Stilldrillin on August 27, 2010, 03:57:20 PM ---Stew,
No nightmares, these days..... :thumbup:
I don't miss it one bit! :D
Nice work, again..... :clap:
David D
--- End quote ---
Is that a stool bottom RH corner ??
Don't look very comfy :(
I would have wanted one better than that, no cushion, no armrests ... damn poor show ..
Dave BC
Stilldrillin:
Dave,
You're just a softie....... I woz well 'ard, in them days......
Sufferin' for it now....... ::)
David D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version