| Gallery, Projects and General > How do I?? |
| Motor reversing |
| (1/3) > >> |
| slowcoach:
Hello, can anyone help, I have a single phase motor 240v AC 1/4hp that I want to use on my pillar drill. The problem I have is that its rotating in the wrong direction (anticlockwise) :scratch: and I was wondering if anyone on here as a solution to my problem? I have tried reversing the polarities but it still runs anticlockwise :bang: Cheers Rob :thumbup: |
| Gadget:
IF the motor can be reversed there will be a wiring chart usually on the motor or inside the wiring box for the motor. If you don't see that you probably have a single direction motor. Turn it around and mount it on the other side of the belt if possible is your only option. Dan |
| Bernd:
I was going to say flip it 180º. May be the same thing Dan suggested. :scratch: Bernd |
| lordedmond:
take the ends off and swap them over so the shaft sticks out the other end Stuart |
| John Hill:
If it has a capacitor it can be reversed by reversing the connections to the starter windings, it is a job for someone who can open it up and figure out how to do it. |
| Navigation |
| Message Index |
| Next page |