Author Topic: Electronics Pocket Handbook  (Read 2898 times)

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2570
  • Country: us
Electronics Pocket Handbook
« on: September 07, 2008, 06:52:50 AM »
Electronics Pocket Handbook
3rd edition
by Daniel L Metzger
Soft cover, pocket size
ISBN#0-130784190-6

   

Since The equipment, used in the fabrication of metal work and general shop work now is becoming more computer and electronic dependent. I thought that I would include a few of the general knowledge books on electronics and computer repair (PC only).

Most are the kind that you pick up and look up something then read. Other than pick up and read through.

The usual disclaimer or notice applies. That you should make sure, you have the latest edition or copyright year. As with all computers and electronics, it changes so fast.

It covers most everything one needs to know whether talking to the service dept about the control ckts in the welder, or computers.

Contents

    * Definitions,formulas,and charts
    * Component data and characteristics
    * Circuit analysis and design
    * Units,conversions,and constants
    * Standards,symbols, and codes
    * Computer,standards and codes
    * Tests and procedures
    * Safety and electrical wiring
    * Dictionary of computer and electronics terms
    * Index


they are generally available here Along with a large number of books for shop needs.http://www.mtroubleshooting.com/mm5/
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen