Gallery, Projects and General > Gallery

OH NO Not another ball turner

(1/2) > >>

wheeltapper:
Well why not, everyone else seems to be making them  :D



and here's a sample on a 6mm rod just to see if it worked.



the first ball made properly will be the one on the handle.

mind you, I think I'll use the collet chuck when using this tool, it comes perilously close to the chuck jaws :scratch:

cheers
Roy

Divided he ad:
Nice one Roy  :thumbup:

Double tipped too.... Most enjoyable shapes to be made IMHO.


Yup, got to watch those jaws when doing work close in. I always turn the chuck by hand with the tool in it's extreme positions to make sure it is safe..... Learned from experience  :wack:



Don't be stingy with the photo's of the finished article and bits you make....  We all likes piccys  :)








Ralph.

Bernd:
Yup, what Ralph said.  :thumbup:

Bernd

johnny123:
hello
Clearance was an issue for me. Built mine low and mean :)

wheeltapper:
thanks for the comments guys.

here's the finished article, complete with ball handle.


now what else can I fit balls onto.............................. :lol:

cheers
Roy

Navigation

[0] Message Index

[#] Next page