| Gallery, Projects and General > Gallery |
| OH NO Not another ball turner |
| (1/2) > >> |
| wheeltapper:
Well why not, everyone else seems to be making them :D and here's a sample on a 6mm rod just to see if it worked. the first ball made properly will be the one on the handle. mind you, I think I'll use the collet chuck when using this tool, it comes perilously close to the chuck jaws :scratch: cheers Roy |
| Divided he ad:
Nice one Roy :thumbup: Double tipped too.... Most enjoyable shapes to be made IMHO. Yup, got to watch those jaws when doing work close in. I always turn the chuck by hand with the tool in it's extreme positions to make sure it is safe..... Learned from experience :wack: Don't be stingy with the photo's of the finished article and bits you make.... We all likes piccys :) Ralph. |
| Bernd:
Yup, what Ralph said. :thumbup: Bernd |
| johnny123:
hello Clearance was an issue for me. Built mine low and mean :) |
| wheeltapper:
thanks for the comments guys. here's the finished article, complete with ball handle. now what else can I fit balls onto.............................. :lol: cheers Roy |
| Navigation |
| Message Index |
| Next page |