Gallery, Projects and General > Gallery

2 cyl. rotary valve engine

<< < (2/2)

HS93:
thank you for that.

Peter

cidrontmg:
Finally I found a camera that does some sort of a video. My own camera is atm in England with my son, the second camera I tried was broken, and this is the oldest camera in our household that basically is a still camera, but puts out 45-sec. clips of video also, at abt. 15 frames/sec... And no sound  :(
Seems I have to buy yet another video camera   :scratch:
 The quality is rather poor, and I upped it to Photobucket, so it might not even work for everyone. Oh well...
The machine is very free-running, at first it starts with some 0.2 bar, running slowly, then I give it 0.8 bar and itīs a blur, doing some 2200-2300 rpm. Iīve ran it with 3 bar, it did some 5500-6000 rpm, and was on the point of self destruction. Itīs not too well balanced as you can (hopefully) see, with 3 bars, it was held in a bench vise  :D

sbwhart:
Nice Engine runs real well  :thumbup: :thumbup: :thumbup: :thumbup:

:clap: :clap: :clap: :clap:

Thanks for showing

Stew

Navigation

[0] Message Index

[*] Previous page