The Craftmans Shop > PowerSports

Boats sure are alot of work!!!

(1/6) > >>

Powder Keg:
Anyone here run boats? I have a 1975 Reinell Tri hull that I fish with. I made a deck over the front seats and added a trolling motor to the front. I have been fixing it up the last few weeks:o) I'll try and post a few pictures. We are planning on decimating a couple generations of bass and carp this summer\0/

Bernd:
Does a 22ft long by 8ft wide poontoon boat count?

Pain the butt to dock at a 10ft wide dock in a side wind.  :(

Bernd

Powder Keg:
If I was to get a different boat it would be a "Party Barge" I'll post some pictures of mine when I get her in the water.

Powder Keg:
So far Ive installed new carpet. Replaced a couple pieces of wood that were rotten under the dash. Installed new fishing pole holders. Today I made a box to store the trolling motor battery. It also serves as a step up to the deck. I started to tidy up the wiring today. I'll see if I can get the bottom finder installed tomorrow. I also have some painting and some welding to do. I'm making a rack to hold a cooler on the splash deck near the motor. Then the new seats can go in and we can hit the water :clap:

I know :worthless: I'll see what I can do:o)

Powder Keg:
Here's a couple of quick pictures. Here you can see the new boards that I put in under the dash. The new Fire extinguisher is handy and out of the way. The box in the center houses the battery for the trolling motor and serves as a step to get up onto the deck in the front. Nice new carpet.



The deck\o/



I think I have the wiring nearly sorted out. I have to clean a few more connections. I need to get a Tachometer and a radio. I also ran the wires for the bottom finder today. Hopefully I can hit the water this week\o/

Navigation

[0] Message Index

[#] Next page