Bernd
Glad to see that you finally got it. Now that you have it what projects have you in mind to use it on? When you get it unpacked and running don't forget to fire up the camera or you know what you will get.

Cheers 
Don
Ya well I had to save up my pennies first.

Hopefully next year I'll have enough pennies to buy a CNC table to mount the plasma cutter. The dealer I bought my plasma cutter from is going to offer the PlasmaCam system. Here's the website for PlasmaCam:
http://www.plasmacam.com/indexfla.php Here's another site I've looked at to. Torch Mate:
http://www.torchmate.com/The best part about one of these is that you can also mount a laminate router and do wood carvings, make signs, both in wood and metal. You can also use the table to rout aluminum or engrave it. I know a guy who would like to have motor plates engraved for the front engine mounts for the drag cars he builds.
I plan on slowly getting a shop together to do some sheet metal work. If you go to the Plasma Cam's site you'll notice that out door furniturre, such as tables are popular. Along with this set up I plan on trying powder coating and aluminum anodizing. Already have the powder coating gun, just have to build an oven to bake the parts in. Still need to get all the stuff to anodize yet.
So those are the plans for when I finally get the house done and will be "offically" (

) retired from doing any kind of work.

I plan on keeping a build log or how I did log on here. So no worry of not getting pics. Just going to take a bit of time.
Bernd