« previous next »
Pages: [1]   Go Down

Author Topic: Finger Plate  (Read 16592 times)

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Finger Plate
« on: March 23, 2010, 12:55:50 PM »
Ok, I finally have the finger plate "almost" complete. By almost I mean I still need to knurl the knobs. But that's another project all together.

Now as I said in the Logan Lathe thread in the The Water Cooler. I was stopped short because I couldn't single point a thread do to lathe problems. Here's the thread in case your interested: http://madmodder.net/index.php?topic=2861.0

Anyway here's what Guy's "finger plate" looks like.


Here I've finished the 5/16-18 thread and am checking to see if the lock down nut fits. Perfect fit.


Here are all the parts that make up the finger plate as I did it.


Here are all the parts assembled ready for use.


And here it is in use drilling a hole in a round part.


That's it. Questions will be answered if you have any. :wave:

Another useful tool finally done. Now on to the next project. I've discovered if I don't mention what my next project is I will be more likely to work on it and get it done.  :ddb:

Bernd
Logged
Route of the Black Diamonds

Offline tel

  • Jr. Member
  • **
  • Posts: 67
  • Country: au
Re: Finger Plate
« Reply #1 on: March 23, 2010, 03:23:53 PM »
That's a very nice finger plate Bernd, much nicer than the couple of rough and ready ones I have knocked together in the past. You will find it very useful. :thumbup:
Logged

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Finger Plate
« Reply #2 on: March 23, 2010, 04:54:43 PM »
Bernd

Nicely done Bernd. That will be a handy little tool to have around. :ddb: :ddb:
Now I have to wonder is he going to finish up one of the other projects or has he got a new project in mind.  :doh: I guess time will tell.  :coffee:

Cheers  :beer:

Don


 
Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Finger Plate
« Reply #3 on: March 23, 2010, 06:24:28 PM »
Tel,

Thanks. It should come in handy for those small model railroading jobs.

Don,

Thanks.

Quote
Now I have to wonder is he going to finish up one of the other projects or has he got a new project in mind.
No way your going to get that one out of me.  :lol: Just remember kitchen cabinets take top priority.  :lol:

Bernd
Logged
Route of the Black Diamonds

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5534
  • Country: us
Re: Finger Plate
« Reply #4 on: March 27, 2010, 10:55:55 PM »
Nice work Bernd. One of the things that is on my list... if work ever lets me breathe!

Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Dean W

  • Hero Member
  • *****
  • Posts: 571
  • My kingdom for a lathe!
    • Projects web pages
Re: Finger Plate
« Reply #5 on: March 27, 2010, 11:33:13 PM »
That turned out quite nice, Bernd.  A handy fixture I've had on my list for, (good grief), about ten years!

Dean
Logged
Dean W.

Shop Projects:
http://www.deansphotographica.com/machining/projects/projects.html

Praise the Lord and pass the Carbide!

Offline BobWarfield

  • Jr. Member
  • **
  • Posts: 26
    • CNC Cookbook
Re: Finger Plate
« Reply #6 on: March 28, 2010, 01:28:41 PM »
Very nice!

Little fixtures like that one are indispensible for working with small parts.

Cheers,

BW
Logged
Try G-Wizard Machinist's Calculator for free:  http://www.cnccookbook.com/CCGWizard.html

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Finger Plate
« Reply #7 on: March 28, 2010, 08:38:33 PM »
Thanks guys.

Believe it or not I'm working on a few more. Don't know where this burst of  :proj: came from, but I hope it stays awhile.

Bernd
Logged
Route of the Black Diamonds

Rob.Wilson

  • Guest
Re: Finger Plate
« Reply #8 on: March 29, 2010, 02:59:58 PM »
Nice one Bernd  :thumbup:  :clap: :clap: :clap: :clap:

Regards Rob
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Finger Plate
« Reply #9 on: March 30, 2010, 08:47:59 AM »
Appreciate it rob. :wave:

Bernd
Logged
Route of the Black Diamonds

Offline bramley51

  • Jr. Member
  • **
  • Posts: 12
Re: Finger Plate
« Reply #10 on: March 30, 2010, 05:47:42 PM »
Bernd,I picked up the very same thing at a "bring 'n buy"at our club.It's a very useful item for holding small parts to be worked on.
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Finger Plate
« Reply #11 on: March 31, 2010, 02:46:06 AM »
A very nice bit of work Bernd.

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Finger Plate
« Reply #12 on: March 31, 2010, 08:48:27 AM »
Thanks for all the cudo's guys. Really appreciate it.

Bernd
Logged
Route of the Black Diamonds

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Finger Plate
« Reply #13 on: March 31, 2010, 08:57:35 AM »
You deserve it Bernd  :clap: those bits look so well machined they could have been bought from a store  :)
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
Pages: [1]   Go Up
« previous next »