| Gallery, Projects and General > Project Logs |
| Steam Engine Wickholders. |
| << < (2/5) > >> |
| Stilldrillin:
On with the 2nd op...... Found I`d parted off all of them to within .004" oal. Not bad for an old `un, with a 6" rule...... :D Turn locating dia to .003" interference....... Drill through to .050" short of breakthrough....... Remember, 9 turns tailstock handle. Not much wall thickness left...... 3rd op. Drill 1mm dia breather holes. All done..... Time for a group shot! 4off, bound for Germany. 2off for America. 2off for Australia. NO woopsies! :headbang: 4off spare, for as & when....... Just a bit pleased! :) David D |
| CrewCab:
Nice going David :thumbup: CC |
| sbwhart:
--- Quote from: Stilldrillin on March 23, 2010, 02:13:19 PM --- All done..... Time for a group shot! 4off, bound for Germany. 2off for America. 2off for Australia. --- End quote --- You should go under the name stilldrillin international, :D Well done Dave nicely shown :thumbup: Stew |
| Bernd:
Nice work. :thumbup: Quite a world wide clientel there too. :clap: Bernd |
| slowcoach:
Nice bit of production work :thumbup: fancy a job at my place :clap: Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |