| Gallery, Projects and General > Neat Stuff |
| Whats Next? Smart Bolts |
| (1/2) > >> |
| dsquire:
While out stumbling around on the Internet I Stumbled across this, Smart Bolts. http://www.smartbolts.com/?gclid=CKP-pu_xuaACFVl35Qod2Cz3Uw Apparently you can tell just by looking at the bolt how much tension it is under. Could be a good idea but I bet they are expensive. I wonder if they make them in 2-56 size for our engines. :lol: :lol: Cheers :beer: Don |
| andyf:
--- Quote from: dsquire on March 15, 2010, 12:28:31 AM ---..... I bet they are expensive. I wonder if they make them in 2-56 size for our engines. :lol: :lol: Don --- End quote --- You'd win your bet, Don. According to this review, about $20US each :bugeye: Fascinating idea, though. Andy |
| 75Plus:
This brings up the question "How tight is tight?" Once the indicator turns black how do you determine if it is over torqued? I can see how it would be easy to over torque while using a socket which covers the indicator. Not all bolts of a certain size should be torqued the same. Torque depends on application. These bolts are probably used by the government since it assumes we the people are too stupid to tighten bolts properly. It is also the only user that can afford them. Joe |
| chuck foster:
how tight is tight :scratch: :scratch: my rule is tighten the nut or bolt till it breaks then back it off a quarter turn :doh: :lol: :lol: chuck :wave: |
| websterz:
Can I get one of those installed in MY head to check MY stress level? :borg: |
| Navigation |
| Message Index |
| Next page |