| The Shop > Electronics & IC Programing |
| LED Help please |
| << < (4/5) > >> |
| Baldrocker:
Powder Keg Is there some reason why you cant use the led auto lamps listed on http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2F1157.htm seems a lot easier than messing about with individual leds. I've used them on my car for some time with no problems. Just a thought BR |
| Powder Keg:
I tend to do things the hard way. I find I learn more that way :doh: Here is what they are going in. http://madmodder.net/index.php?topic=440.15 |
| michvhf:
--- Quote from: Bernd on March 14, 2010, 06:03:12 PM ---Wes, I found my notes, old as they may be, on figuring out te resistors for an LED. All you'll need to know is what the forward voltage and the amperage is of the LEDs your going to use. To find the wattage of the resistor the formula of amps X volts = watts. Here's the notes: Hope this helps. Bernd --- End quote --- That brings back memories. I used to have that same notebook! Light blue cover as I recall. Lots of good info in there. |
| Bernd:
--- Quote from: michvhf on March 17, 2010, 02:57:40 PM --- That brings back memories. I used to have that same notebook! Light blue cover as I recall. Lots of good info in there. --- End quote --- Mine's a pinckish red color. Maybe they made them in different colors. :scratch: Have the whole series. Good basic info. Bernd |
| John Swift:
Hi Powder Keg If you are still experimenting with led lights have you tried a constant current supply for the leds a 10v chain of leds for example will remain at a constant brightness while the battery voltage varies from 12 to 16v a 2n3819 fet with the source and gate terminals joined will limit the current to about 9 mA into a short circuit or a string of leds adding upto 1 or 2v less than the supply the maximum volt drop across the fet is 24v , check the dissipation is not more than 200mw John |
| Navigation |
| Message Index |
| Next page |
| Previous page |