| Gallery, Projects and General > How do I?? |
| 12 tooth 6mm pitch sprocket |
| (1/2) > >> |
| almost fits:
Hi , I am in need of a 12 tooth 6mm pitch sprocket, I think I may be able to make one, but first I wonder if anyone can give me some advice on "how To" in order to see if my idea is on the right lines. Thanks Almost fits |
| John Rudd:
What diameter? |
| John Stevenson:
If it's 12 teeth and 6mm pitch it can only be one diameter. It will have a pitch diameter of 0.915" and an OD of 1.064" John S. |
| almost fits:
Hi, I think the diamiter will be set by the number of teeth and the pitch ie 12X6mm = 72mm circumference, this would be the line to drill the 12 4mm (the dia of the chain rollers) 6mm apart (on an oversized disc) these holes would then be opened outward to form the teeth - I think (hope)!! Almost fits. |
| almost fits:
Thanks John, i aint got around to working it out so precisly. Almost fits |
| Navigation |
| Message Index |
| Next page |