| Gallery, Projects and General > Project Logs |
| snow Tandem |
| << < (7/11) > >> |
| Brass_Machine:
Wow. Nice pipework Joe! Eric |
| Joe d:
Thanks, Eric Almost the end of plumbing :ddb: Turned some brass to make flanges Bent some tubing with the shop-built tubing bender Here's all the parts together, shaped the flanges by hand with a file, seemed like way too much mucking around to machine it for four pieces whose only critical point is the fit of the tubing ::) soldered together, And here they are in place. Coolant from the water jacket exits through these assemblies, squirts into the funnels to return to the coolant tank. Fuel tank or coolant tank next, haven't quite decided... Cheers, Joe |
| madjackghengis:
Hi Joe, it's been a while since I looked at your build log, and I have to say you've done some very fine work and the engine is coming along smashing. I think it won't very long before you are posting a video of it running, and we get to see and hear what one of these unique engines look and sound like in operation. The pipe work looks beautiful, the different metals are doing a bang up job of drawing the eyes to the details, and it is quite impressive looking and makes me a bit envious. Outstanding job and patience. :bow: :bugeye: :jaw: mad jack |
| Rob.Wilson:
:bugeye: fine bit of pipe work Joe :bow: :bow: :bow: your making good use of the pipe bender :dremel: Rob |
| Joe d:
--- Quote from: madjackghengis on July 05, 2010, 09:37:28 AM --- and makes me a bit envious. mad jack --- End quote --- Mad jack: I've been following your radial build....no need for any envy on your part :thumbup: thanks none the less for the kind comments. Thanks Rob. Decided to get going on the fuel tank, and I know that :worthless: so there will be some soon. Joe |
| Navigation |
| Message Index |
| Next page |
| Previous page |