« previous next »
Pages: [1]   Go Down

Author Topic: Hi. Newcomer from Newcastle  (Read 4967 times)

Offline Ferrum

  • Newbie
  • *
  • Posts: 1
Hi. Newcomer from Newcastle
« on: March 02, 2010, 08:18:36 AM »
Hello.
I am a novice who has taken up model engineering in retirement.

I think that I will learn a lot from the posts of this forum and I will try to contribute what I can!

Ron
Logged

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Hi. Newcomer from Newcastle
« Reply #1 on: March 02, 2010, 08:25:44 AM »
Hi Ferrum, welcome to the group, and don't be afraid to ask, the chaps here need an excuse to waffle on a bit  :lol:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Hi. Newcomer from Newcastle
« Reply #2 on: March 02, 2010, 12:45:45 PM »
Hi Ron,

Welcome to the collective! 

We`re all novices, at some part of all the hobbies we enjoy..... There`s always sumbody knows summat.....  :thumbup:

Ask away. Show pics. Enjoy!  :D

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Hi. Newcomer from Newcastle
« Reply #3 on: March 02, 2010, 12:53:49 PM »
Hi Ron, welcome aboard mate  :thumbup:

CC
Logged

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: Hi. Newcomer from Newcastle
« Reply #4 on: March 02, 2010, 02:16:39 PM »
Hi there Ron :wave: welcome to the club.

Like the others have said, we are all novices, some are a little less novice, but there's not one of us who knows it all, we are all learning.


Welcome aboard the good ship Madmodder


Tim
Logged
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
Re: Hi. Newcomer from Newcastle
« Reply #5 on: March 02, 2010, 02:38:38 PM »
Hi Ron,

Welcome to the club, pull a chair and settle down for a good 'ole natter.... :thumbup:
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Hi. Newcomer from Newcastle
« Reply #6 on: March 02, 2010, 05:44:08 PM »
Ron

Welcome to MadModder. We certainly hope that we can help with the learning process now that you have retired. If you have any questions, ask away as there is always someone around to give and answer or at least an opinion. While  :coffee: in these forums you will no doubt get  :proj: for which there is no known cure except to start building it.  :D :D

Cheers  :beer:

Don
Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5534
  • Country: us
Re: Hi. Newcomer from Newcastle
« Reply #7 on: March 07, 2010, 01:49:20 PM »
Hi Ron,

Welcome to the collective :borg:

Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Davo J

  • Sr. Member
  • ****
  • Posts: 475
  • Country: au
Re: Hi. Newcomer from Newcastle
« Reply #8 on: March 07, 2010, 06:44:29 PM »
Welcome Ron,
Plenty of good info and projects on here, as you have probably already seen. :mmr:
Dave
Logged
Pages: [1]   Go Up
« previous next »