| Gallery, Projects and General > Project Logs |
| Start on a long term project |
| (1/23) > >> |
| ozzie46:
Well I have made a small step on my Loco build. It is the model engineer "Simplex". Here are the frames leaning against what will become the cyl stock. This build may take quite a while to complete so please bear with me. All comments and advice are eagerly sought. Quite a bit of hacksaw and file work went into the frames. Another needed skill to practice for my foray into machining. ;D ;D ;D The frames are still bolted together as I don't want to separate them til I'm sure I don't need to do more on them. They were cut and drilled as a unit to make sure everything lined up. Ron |
| CrewCab:
Your hacksaw and filing work looks to be off to a good start Ron :thumbup: look forward to following your progress. CC |
| ozzie46:
Thanks CC. Ron |
| Maninshed:
Hi Have a look around the 'model engineers clearing house' webb site there are neumerous sections on simplex, there's a guy 'Dr John' on that web site who literaly gives a blow by blow description of building one good pic's to, follow the links to his site. Good luck. |
| ozzie46:
Thanks Maninshed, I found the Simplex web site but couldn't find DR. Johns. Did find a "Tich" bulid though. Ron |
| Navigation |
| Message Index |
| Next page |