Hey Chris,
Thanks. I'll post pics next time I unbag the machines. The system is Very basic. I don't like things moving arround much so I made it non adjustable.
The display is mounted directly on a 1" aluminum square tube and that in turn is bolted to the underside of a 6" x 4" plate. The plate is secured to the bottom of the control box with two bolts. All 6 bolts are 1/4-20.
I'll try to find some thin polycarbonate to cover the X & Y scale heads. I soldered the four pin connector wires to the heads and then jammed the opening with some black RTV.
My next mod is going to be a dedicated and remote vac to suck the chips away as they are made. I'm tired of holding the shop vac hose.