| Home Base > Announcements & Issues |
| Metal cutting saw ? |
| << < (2/3) > >> |
| John Stevenson:
I bought one anyway, was going to and just put the link up for others. Works great, cut a sheet of 4mm steel up into 90mm wide strips, clean edges, very fast and best bit is no distortion. Also cut a 2mm sheet of alloy up but that was a no brainer, well it was to me as I don't have a hand held circular saw. Tried it on a sheet of 12mm alloy and it wizzed thru. I can see this being a useful piece of kit, at least for what I do. I also have the Evolution chop saw but they won't handle sheet. . |
| Darren:
You did put a link up before John, and that's why I have one now :thumbup: Glad to hear it's doing fine for you, I have an evolution too and if it cut anything like that I will be pleased :ddb: |
| Darren:
I tried the saw out today, a bit of gate work and trimming the bottom off a door. Ok it's not metal but the saw cuts really neatly like butter. Far neater than my old circular saw. |
| Darren:
My saw broke :( I was only cutting some wood with it. The blade spins freely enough but it's no longer connected to the motor. Something has sheared :zap: I have the receipt, but Aldi won't have a replacement :doh: |
| John Stevenson:
Clumsy bastard John S. |
| Navigation |
| Message Index |
| Next page |
| Previous page |