| The Shop > Tools |
| Repairing a Cub Lathe |
| << < (6/31) > >> |
| Rob.Wilson:
Hi ALL A bit more progress , not allot , but still moving forward , i turned up the change wheel blank and bored . i fitted the slotting attachment to the lathe , so please i made the slotter, it works a treat . :D marked off the bull gear every 10 , to give six devisions all set ready to go first one cut all done then i turned up a mandral ,and turned the O/D of the gear still a bit of turnning to do to the blank Cheers Rob |
| Rob.Wilson:
Hi Lads Finished of the turnning on the gear blank , set up for gear cutting One down Cheers Rob |
| slowcoach:
Brilliant Rob, just brilliant :bow: Right thats it, I'm going to make some change gears for my Harrison :) Rob :thumbup: |
| Darren:
Cut right first time, no mistakes, didn't need to start over again..... I'll get me coat !! |
| slowcoach:
--- Quote from: Darren on January 25, 2010, 05:57:05 PM ---Cut right first time, no mistakes, didn't need to start over again..... I'll get me coat !! --- End quote --- I will turn the lights out mate :lol: :lol: :lol: |
| Navigation |
| Message Index |
| Next page |
| Previous page |