| The Shop > Tools |
| Repairing a Cub Lathe |
| << < (4/31) > >> |
| Rob.Wilson:
Hi John Yep thats normal mate , my Boxford and Myford lathe ,both do that , i just have to flip the tumbler reverse lever . Regards Rob |
| Rob.Wilson:
Hi Lads I thought i would make a start on the gears today , then i realised i still had no way of indexing on the myford ,as i have put the indexer on hold, and i need to cut six 1/4" keyways in the change wheel boss. So this morning i made this , to index of the 60T bull wheel and lock the chuck in position Its made to fit so it dose not need removing from the lathe , Now to make a 1/4 tool holder for my slotting attachment Cheers Rob |
| Darren:
You never cease to amaze me Rob, very eloquent :clap: |
| Rob.Wilson:
Cheers Darren Well i have made the 1/4 tool holder for the slotter, and my saw has finaly finished cutting through a 6" dia cast iron bar,after 4 hours,i must get some new blades ,poor saw,,, so now i have the gear blank for the 110 t gear. I think i will have a brake, as i keep putting things down ,and then some one moves it, i look all over , then they put it back ,right in front of my eyes :hammer: Cheers Rob |
| Darren:
OK, enough of the tool porn ... I would like to know how you made that square hole .... :scratch: |
| Navigation |
| Message Index |
| Next page |
| Previous page |