Home Base > Introductions

It doesn't get much more newb than me.

<< < (2/3) > >>

dsquire:
Jamoni

Welcome to MadModders. Glad to have you aboard. I see that you have posted a few photos already so I guess you know the drill regarding photos. We have people on here with a lot of varied talents so I think you will be happy with what you find. If you have any questions, I'm sure someone will have an answer or at least an opinion.  :ddb: :ddb:  :mmr:

Cheers  :beer:

Don

jamoni:
Thanks for the warm welcome!  As a matter of fact, I DID do some work on the shed today.  I'm putting it up on pavers to get the wood off the ground, since I can't put down gravel in the yard.  So today I measured out the edges, drove some stakes, and put a level line around them.  Then I dug down until the pavers were all at the same level.  This gives me a flat platform to lay the bearers, then I can place the joists across them.
I'm aiming to get the whole floor assembled this weekend.  I hate the cold, but I hate not having a decent shop even more.  :)

Bernd:
Mike,

Don't know if your know this or not so take it with a grain of salt. The floor you propose to build will be fine for the size machines you'll be using. But if you ever get to a floor model lathe or mill a wooden floor such as you are going to build will not support larger machines. The larger machine would need a good concrete floor to keep them level and square. Just my 2 cents worth.

Bernd

jamoni:
Oh yeah, I know.  There won't be anything in there larger than a benchtop milling machine.  Oh, and as many motorcycles as will fit :thumbup:. I rent but am looking to buy.  Once THAT happens, then we'll start looking at some serious iron.   :headbang:

Stilldrillin:
Welcome Mike!  :wave:

You`ll do nicely here!  :thumbup:

Join in. Show pics. (Hmmm..... You are doing already!). Enjoy!

David D

Navigation

[0] Message Index

[#] Next page

[*] Previous page