| The Breakroom > The Bookshelf |
| The Pipe Fitter's and Pipe Welder's Handbook |
| (1/1) |
| PTsideshow:
The Pipe Fitter's and Pipe Welder's Handbook by Thomas W Frankland Glencoe Plublishing copyright©1984 ISBN# 0-02802500-8 Another pocket sized format just under 4"x6" it is amazing what they can pack into such a small space. Divide into 4 sections: Basic Trade Mathematics Starting with the math, and making as painless as possible. Triangles and trigonometry,the set,run and travel Along with all manner of formula for laying out pipe bends from simple to wrinkle bends and everything in between. Linear expansion of pipe,Capacities of tanks,of all shapes. Methods of layout for angles,flanges squares,elliptical holes in sheet metal. Pipe Fitting Calculations Calculating offsets,rolling offsets, offsets and around obstructions of all types. A truly bewildering array of offsets. Pipe Welding Layout General layout, and turns to the laying out of the cut lines for all manner of fittings and runs. Tees, reducing tees, true Y's, blanking off pipe with orange peel or bull plugs. To a number of methods for laying out angle iron brackets from one continuous length of steel. Reference Tables Are filled with the dimensional information on all kinds of pipe and fitting materials.Along with a few of the most useful tables for a pipe fitter If you do the pipe hand railings, this would be a bonus for you for the double offsets, and all the other moves in pipe that have you scratching your head. And saying How do I do that. |
| Navigation |
| Message Index |