| Gallery, Projects and General > Project Logs |
| 90 degree V twin engine (my own design) |
| (1/8) > >> |
| gbritnell:
Gentlemen, here's some progress shots of my current project. It's a 90 degree V-twin engine, 1.00 bore 1.25 stroke, air cooled and pressure oiled. Everything is machined from solid material. The crankcase is 6061 aluminum as are the timing cover and rocker arms. The crank is 1144 steel and the rods are mild steel. The valves, keepers and spring holders are stainless. I designed it several months ago and got started on the build shortly after. George |
| gbritnell:
Some more pictures. |
| gbritnell:
One last shot. |
| Bernd:
George, That's some real nice fabrication job. :thumbup: Nice finish. I take it that is was done with a grinder, files and sand paper? Bernd |
| S_J_H:
Beautiful! Fantastic work!!! :bow: Steve |
| Navigation |
| Message Index |
| Next page |