The Shop > Wood & Stuff |
Hand Cranked Organ winter project |
<< < (13/16) > >> |
Powder Keg:
Thanks Nick. Tonight I made a little crank holder. I need to hold things straight while I silver solder the pieces of the crank together. We don't want a wonky crank. LOL I also cut out a couple of little blocks of wood that will be the bearings for the crank shaft. I'll get a couple pictures when I get them a little farther along. No one wants to look at pictures of little blocks of wood do they? Well, some here might. :lol: :lol: :lol: I'm glad to be back on this one also :wave: |
Powder Keg:
Spent the night in relaxing with my lovely wife. I did get to the hardware store after work. I found these little wood screws that had a 8-32 bolt on the opposite end. They will hold the main bearing caps on. So tonight, pictures of little blocks of wood. Later, Wes :wave: |
Powder Keg:
Today I about got the rollers made. I still have to drill and tap them for setscrews. I'm going to try and get the crank silver soldered together tomorrow. I can get better pictures when I get things mounted to the pressure box. Wes :wave: |
Powder Keg:
Grrrrr I seemed to have misplaced my silver solder...... :bang: :bang: :bang: |
andyf:
--- Quote from: Powder Keg on April 10, 2011, 03:15:28 PM ---Grrrrr I seemed to have misplaced my silver solder...... :bang: :bang: :bang: --- End quote --- Got any old coins? http://www.oldengine.org/members/christison/resources/allen.htm Andy |
Navigation |
Message Index |
Next page |
Previous page |