The Shop > Electronics & IC Programing
getting started with electronics
John Rudd:
--- Quote from: John Swift on July 18, 2010, 07:36:39 PM ---Hi Rob ,
I have made a medium wave transistor radio with denco coils in the past
later adding a shortwave converter to the mw radio tuned to 1.6MHz
I would like to have a go with a valve (tube) TRF radio when I have the time
--- End quote ---
Ahhh.Denco coils... ( Clacton on Sea Essex... :clap: )
Reminds me of when I were a lad reading Gilbert Davey's book 'Fun with Radio'.... a single valve trf receiver using a DF91 ( or IT4 if you like) Happy days...
FWIW, my first ever radio I built was a crystal set that my dad bought me...it needed a soldering iron for assembly..Not deterred by this, I managed to'dry' assemble it and have it work... :clap:
John Swift:
Hi Jack
you have not given any details about your stepper motor , is it a unipolar or bipolar motor ?
if you just want to just test the stepper motor out for now
try some thing like the 3187KT bipolar motor driver or 3179KT unipolar motor drive kits from Quasarelectronics.com
with a simple ne555 ic oscillator providing step pulses ( could be a modified audio signal generator kit )
I'm a few steps behind you ,
I have thought my fist step is to provide a variable speed drive to the lead screw
to get a practical feel for the torque and maximum speed of the stepper motors
but first I need to get my old ( new to me ) lathe going first
Hi John ,
would that be the green octal plug in ones
those battery radio valves work ok of 3 or 4 9v batterys for the HT supply
you can find scans of the old 90v batterys if you want to make your own
John Swift
kwackers:
Jack, I know you want to make your own - but if it's any help here's one I made earlier...
http://www.cnczone.com/forums/showthread.php?t=47007
There's source in the first post which might help too.
Re: the 90v radio batteries, a few years ago I made one for a guy I knew. Basically just a set of rechargeables and inverter built into the case of an old battery with a socket on the bottom to charge it up. Worked a treat and even losing the space for the inverter it still ran far longer than the original battery.
raynerd:
I converted my 4" vertex using Kwackers divider...it is great - http://madmodder.net/index.php?topic=2242.0
John Rudd:
--- Quote from: John Swift on July 22, 2010, 07:07:09 PM ---
Hi John ,
would that be the green octal plug in ones
those battery radio valves work ok of 3 or 4 9v batterys for the HT supply
you can find scans of the old 90v batterys if you want to make your own
John Swift
--- End quote ---
Ummm.I though they used the B9A plug/socket arrangement...? :scratch:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version