The Shop > Metal Stuff

Metal Spinning

(1/5) > >>

Rog02:
I am starting this topic to continue the discussion started on the "Little Bit Of Everything" thread.   

Since the discussion was turning more to spinning I thought it might be better to start a new topic.

Roger
AKA The Grumpy_OldMan

Rog02:
OK Guys:

I am going to be gone for a few days so before I leave town I thought I would post some links for those with an interest in metal spinning.

Link to one person's homemade spinning lathe.
http://www.aardvark.co.nz/pjet/spinning1.shtml

Bazz Shop
http://www.bazzshop.com/

Terry Tynan Metal Spinner
http://www.terrytynan.com/metalspinning.html

James Riser 
http://www.jamesriser.com/CD_Preview/Intro.html

Paul Wiley Metal Spinner
http://www.paulwileyspinning.com/index.html

Metal Spinning Workshop   (Be sure to check out the link to the forum)
http://www.metalspinningworkshop.com/

Making Metal Discharge Balls By Spinning on a Southbend Screw Lathe
http://www.coe.ufrj.br/~acmq/spinning/

Metal Spinning On A TAIG Lathe
http://www.walteranderson.us/hobbies/metalworking/metal_spinning/index.html

Toroids and other mad scientist experiments
http://futuret.110mb.com/syncron99/tube1.htm

Franjo Metal Spinning  Downloadable Videos of Manual and Automatic Spinning
http://www.franjometal.com/metal-spinning/spinning-videos.html

Roger
AKA The Grumpy_OldMan

The usual disclaimers apply!  I have no financial interest nor do I recommend one opinion over another.  This information is presented for entertainment purposes only and any use of said information is on you. 

Divided he ad:
Thank you for your efforts Roger, I'm on holiday from wednesday evening so will not be able to give full attention until monday evening .... But I will look at them all  ;D


Ralph.

Powder Keg:
This is funny. I have alwayse wated to try this and I just rented the two part video on spinning. It looks like lot's of fun. There are a few videos on Youtube also.

Wes

Brass_Machine:
I am going to be renting those videos very soon.

I like the first link with the guys home made spinning lathe. Gives me inspiration.

Eric

Navigation

[0] Message Index

[#] Next page