| Gallery, Projects and General > Project Logs |
| Project - Well it's about time! |
| << < (4/5) > >> |
| Bernd:
There's just one little trick Eric forgot. Don't mean to pick nits, but you need to make sure you have the negative on the board the right way or you can print it backwards or upside down. You'll find that out when you first put the components on and find they won't fit properly or not arranged the way they show on the plan. Nice short demo though Eric. Explains one way of doing it. Never tried that method. Bernd |
| Brass_Machine:
--- Quote from: Bernd on December 02, 2009, 09:28:36 PM ---There's just one little trick Eric forgot. Don't mean to pick nits, but you need to make sure you have the negative on the board the right way or you can print it backwards or upside down. You'll find that out when you first put the components on and find they won't fit properly or not arranged the way they show on the plan. Nice short demo though Eric. Explains one way of doing it. Never tried that method. Bernd --- End quote --- Very true Bernd, I did forget to mention that... reason being, they were already created as a PDF... print and go. Eric |
| ariz:
well Eric, for one that says 'never etched a PCB' you got a very nice result there :clap: I didn't know that you were ill, and I'm very happy to see that you're back on work and feel better you're the founder of madmodder and we all need your presence, like... humm... hemm... like sailors in the storm need a lighthouse :doh: :mmr: :mmr: :mmr: |
| NickG:
Nice work Eric, glad you're back out in the shop. Nick |
| Stilldrillin:
Very nicely done Eric! :clap: Welcome back..... :thumbup: David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |