| Gallery, Projects and General > Project Logs |
| My latest project. Gingery horizontal mill |
| << < (18/24) > >> |
| Gadget:
I machined the other side of the casting today. Everything fits nice and flat. Next step is to add the clamps. The dark spots are grease on the bearing surfaces. Dan |
| DeereGuy:
Dan they finished up nicely :thumbup: |
| Gadget:
I finished the cross slide fitting today. It is perfectly square to the bed ways and is nice and tight with no play in either direction. Bed and table travel is smooth. It doesn't look like much change but it took a lot of work to get it fit properly. Dan |
| DeereGuy:
Dan this is a great project. Did you have to do any scrapping? |
| Bernd:
Dan, Nice looking machine. Nice castings to. Are you going to CNC it? :) Having those books by Gingery I can follow what your doing. Like you say may not look like you got alot done but there is a lot of work put into making a casting and then machining it and fitting it to the rest of the machine. Going to be a neat looking table top milling machine when your done. Bernd |
| Navigation |
| Message Index |
| Next page |
| Previous page |