| Gallery, Projects and General > Project Logs |
| Myford to ER32 collet |
| << < (3/3) |
| dsquire:
John Thanks for having us all along for the watch. I know that I learned a bunch and I am sure others did as well. This should give you a new level of satisfaction when you are machining and moving between operations and machines. Very well done John. :ddb: :ddb: :ddb: Cheers :beer: Don |
| Bernd:
Nice job as always Bog's :thumbup: Bernd |
| DICKEYBIRD:
Thanks again John for your excellent tutorial. I am gathering the necessary "stuff" (mostly gumption needed) to make one of those. As mentioned above, I was thinking about welding 2 pieces together to fit my flanged spindle but EUREKA! Look what I found in my junk box today. I'd forgotten all about it. It's a connector shaft off of one of those steerable Vermeer (or Burkeen) horizontal drilling machines. I saw it lying beside the hiway a few years ago and stopped to pick it up. I have cut several chunks off it to make various bits of tooling and it machines well. The flange OD on my lathe is a bit less than the inner edge of the bolt holes so it should do great! Dear Santa, will you bottle up some Bogs Gumption™ and leave it under the tree for me?;) |
| Navigation |
| Message Index |
| Previous page |