Hello from South Wales

Home Base > Introductions

<< < (2/3) > >>

djh82uk:
Ok been taking some photos:

This is my workshop, not huge, but not tiny either

this is it from the other end.

My Lathe

My Taig CNC Mill

My Lathe & Mill sat in the flood Bath that I have reently finished, I basically made some wodden sides and used heavy duty floor tiles, shower grouting & silicone sealant. It has a plug hole that runs through a filter and bag down to the tank.

My Axminster Bandsaw, don't know how I managed before getting this.

Pillar Drill & various storage behind for lathe tooling etc.

Various Power tools, welders etc, very messy, I need to find a better way to organise these.

More pics to follow..

djh82uk:

My Router Table & current project

Bench Grinder and various other things

My Electronics Work Bench

My Collection of Air Tools

An now for some stuff I have made:

This is an exhaust for the car in the router table pic.

This is a rugged accelerometer for a Segway I hope to eventually build.

This is basically a camera that fits into the mill spindle, used with some specialist software, it does measurements, edge finding, center finding etc. Its basically a USB webcam with a new case.

This is an example of a pcb i etched using the cnc mill

djh82uk:
Ok last big post of pictures

These are Spring Loaded Diamond Drag Engravers that I makem they don'nt spin, just get dragged over the surface, the spring allows you get an even depth of cut on uneven surfaces such as cylinders

This is my Flood bath during construction

This a an anchor rope pulley I made for a colleagues boat, the frame was taken from his boat and the pulley made to fit, this was my first commissioned job :) I swapped it for a gasless mig welder.

This is the CNC rotary Table that I did, I posted a lot more info about it in another post on here

Sorry about the image quality, bad lighting and rubish image resizing software

Thanks

DJH

chuck foster:
welcome djh82uk :wave:

nice looking workshop, well equiped :dremel:

i know the feeling about the bandsaw...........i don't know how i worked without mine :scratch:

thanks for the pictures.............we like pictures :beer:

chuck :wave:

Bernd:
DJH,

Welcome to the collective :borg:

Nice shop. Very interresting and diverse interests.

You'll fit right in and probably catch :proj: BTW nothing wrong with those pictures.

Bernd

Navigation

 Message Index

Go to full version