Gallery, Projects and General > How do I??
Arbor spacers.
bogstandard:
This is a where do I, rather than a how do I.
I am searching for a source of arbor spacers to fit a 1" diameter arbour, and must have the keyway already cut.
There is a bit of a criteria, I only want them to a max of 1/32" thick. 0.005" up to, would be fine.
I have found a supplier in the US, but his only go up to about 3/4" bore, but he sells them at the right price, less than 20 bucks for 100.
If they are around that sort of price, I would take 200.
Can anyone help?
Please, none of the 'why not make them yourself' comments.
Bogs
tinkerer:
Here is a link.
http://www.nolansupply.com/bysubcategory.asp?category=Machinery&supercategory=Milling+Machine+Accessories+%2D+Arbor+Spacers&subcategory=Precision+Brand+19+Piece+Arbor+Spacer+Shim%26nbsp%3B&type=False&specs=True
This is a set of 19 from .001 to .125 1" bore 1.25" OD
John Stevenson:
Do you like living dangerously John ?
http://www.mscjlindustrial.co.uk/QNB-63265D/SEARCH:KEYWORD/product.html
Listed as 1" arbor shim set, no picture and not in the catalogue £6.85 a set but you have to ring them.
John S.
bogstandard:
Sorry gents, I must have confused you.
I need ALL the same thickness not a range of sizes.
I need to accurately set up a bank of up to 10 thin slitting saws. The spacing isn't critical, but they all have to be the same.
I require something similar to these, but in 1" bore
http://cgi.ebay.co.uk/Precision-Steel-Arbor-Spacers-5-8x-1-x-005-100pcs_W0QQitemZ220225235672QQihZ012QQcategoryZ25290QQcmdZViewItemQQ_trksidZp3286.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D3%26ps%3D6
Bogs
John Stevenson:
Awkward bastich, you can't help some people :poke:
John S.
Just joking John
Navigation
[0] Message Index
[#] Next page
Go to full version