Gallery, Projects and General > Project Logs

Milling Machine Gib Locks

<< < (3/3)

bogstandard:
I notice it now Darren.

The way I have suggested still seems the logical easy method. The slug on the end only has to be about 2mm long, or even less if you incorporate it into the clamp bolt itself, it is only to prevent damage, so you still might be able to get one in there.

If you are going to try to clamp the gib strip, it seems an awfully long way from the outer edge to put a bolt down.


John

Navigation

[0] Message Index

[*] Previous page