| Gallery, Projects and General > The Design Shop |
| Turning Ball Knobs on A Mill |
| << < (4/4) |
| 75Plus:
Thanks, guys, for the kind comments. Another reason I wanted to use the mill for turning wood was the need for speed. The max I can run the lathe is 1550 RPM which is slow for wood. Having my hand near that 6" chuck spinning at that speed causes a bit of concern. I can run the mill at 2500 with no concerns. Joe |
| CrewCab:
Nice Work :dremel: CC |
| Navigation |
| Message Index |
| Previous page |