| Gallery, Projects and General > Project Logs |
| Boxford Rotary table adaptor |
| << < (2/4) > >> |
| raynerd:
Darren, yes - I see what you mean. Of course I`ll have to chuck up a bar and measure run out there. |
| Darren:
Trouble is Chris it really does look like you are running out of room there? By the time you add a cutter and your work piece it looks like you'll be about done. |
| raynerd:
lol, did notice that !! :bang: I still want to make it to complete the project but my use for the RT mainly involves mounting the RT vertical so will still be of use. Eventually I will get a small slimline front mounting chuck. I`m glad I didn`t go for the 6", I wouldn`t have fit the RT under never mind chuck and work. |
| raynerd:
If only someone supplied a slimline rotary table..... :poke: |
| Gerhard Olivier:
Craynard you not only have to chuck up a piece but true it in the chuck on the lathe. Then move the whole lot chuck and metal piece from the lathe to the RT. Then check as self centring chuck have some runout of their own. Your run out may not be as bad as it looks. Gerhard |
| Navigation |
| Message Index |
| Next page |
| Previous page |