« previous next »
Pages: [1]   Go Down

Author Topic: Keeping thin parallels where you want them  (Read 15261 times)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Keeping thin parallels where you want them
« on: November 22, 2009, 10:37:27 AM »
I picked this up from John on one of my visits

When you need to work close up to the jaws of your vice the parallels can get in the way, so you use thin parallels but these can be a pain to keep in place, so simply slip a coil spring between the parallels to keep then up against the jaws:- like this



Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Keeping thin parallels where you want them
« Reply #1 on: November 22, 2009, 11:03:39 AM »
Nice idea passed on, Stew!  :clap:

I`ve no handy springs..... So I use a piece of steel banding, bent into a U shape......  :thumbup:

David D

Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: Keeping thin parallels where you want them
« Reply #2 on: November 22, 2009, 12:21:47 PM »
Brilliant  :clap:
Logged

Offline websterz

  • Sr. Member
  • ****
  • Posts: 415
Re: Keeping thin parallels where you want them
« Reply #3 on: November 22, 2009, 12:39:46 PM »
Quote from: Stilldrillin on November 22, 2009, 11:03:39 AM
Nice idea passed on, Stew!  :clap:

I`ve no handy springs..... So I use a piece of steel banding, bent into a U shape......  :thumbup:

David D



Same here. Plus, the steel banding itself makes nice thin parallels.  :dremel:
Logged
"In the 60's, people took acid to make the world weird.  Now the world is weird and people take Prozac to make it normal."
 :med:

Baldrocker

  • Guest
Re: Keeping thin parallels where you want them
« Reply #4 on: November 22, 2009, 05:05:05 PM »
Its the passing on of tips like this that help make this site so good.
Some of us new to the game (well perhaps just me) struggle to see
 the most elementary solutions. Please keep them coming.  :thumbup:
BR
Logged

bogstandard

  • Guest
Re: Keeping thin parallels where you want them
« Reply #5 on: November 22, 2009, 05:18:07 PM »
Stew is only showing you this because we found a source of super high quality (Moore & Wright) thin (1/32") parallel sets, at a very low price, unfortunately, limited quantities.

Forget the spring, it's all about the parallels   :lol:

Good, aren't they Stew?


John
Logged

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Keeping thin parallels where you want them
« Reply #6 on: November 22, 2009, 10:24:32 PM »
A piece of foam rubber of the appropriate size will also help hold them in place. Piece of Styrofoam will also work.  :ddb: :ddb:

Cheers  :beer:

Don
Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline khand

  • Jr. Member
  • **
  • Posts: 15
Re: Keeping thin parallels where you want them
« Reply #7 on: November 23, 2009, 11:59:50 AM »
Quote from: Baldrocker on November 22, 2009, 05:05:05 PM

Some of us new to the game (well perhaps just me) struggle to see
 the most elementary solutions.
                                                                                                         I never seem to come up with the simple solutions either. Nice tip.
Logged
Pages: [1]   Go Up
« previous next »