Gallery, Projects and General > Gallery

Home build dividing head.

(1/3) > >>

boatmadman:
A few years ago, I decided I wanted to try and cut some gears, for an idea I had, so, I needed a dividing head!

I already had a peatol lathe, and found plans for a div head by Tony Jeffrie.

At the time I had access to a mill at work, but since then the 'elf & safety police have locked down all the machine tools, so now I am buying one for myself.

So, off I set and ended up with what you see below, along with some gears I cut with 0.5 mod cutters.

Sorry, there are no interim pics to show.


Ian

sbwhart:
Hi Ian

Thats a nice bit of tool making :thumbup: did you cut the worm yourself ?.

Cheers

Stew

spuddevans:
That's a nice piece of work there Ian  :clap: :clap:

Tim

boatmadman:
No, I didnt cut the worm drive - wouldnt know where to start with that!

Ian

CrewCab:
Nice work, though I don't envy you drilling all those holes Ian  :scratch:

CC  :beer:

Navigation

[0] Message Index

[#] Next page