| Gallery, Projects and General > Gallery |
| X2 Spindle Light |
| (1/2) > >> |
| ibuildstuff4u:
I made this Friday for my spindle on my X2 Milling machine. It started off as a square piece of stock and I did most of the work with my mill and rotary table. It consists of 18 ultra bright LED lights and they are glued in with 5 min epoxy. This replaces the old spindle cover and uses the same bolt holes to mount. Dale P. |
| CrewCab:
That's a neat idea, thanks for sharing :beer: CC |
| Gerhard Olivier:
Very nice and a good idea. You can never have to much light when working small bits. Gerhard |
| tumutbound:
Some good ideas. Picked up this 'UFO' light from eBay a couple of months ago with the intention of installing it on the X2. It would be a tight fit though as it's 20mm thick and the spindle (MT3) only sticks out 23mm. I may end up gutting it to get the LEDs as the thickness is mostly due to the AA batteries inside. |
| Brass_Machine:
Very cool! Now I have to make one. Whats the story on your control box? Eric |
| Navigation |
| Message Index |
| Next page |