The Breakroom > The Water Cooler

Chester mini lathe spares.

(1/2) > >>

Gerhard Olivier:
I have been collecting part to do a build of a mini lathe-all the parts is of a Chester mini lathe Some has some mods already done and others are as I got them.

I have the bed - headstock with taper bearings and a metal master (big) gear - tailstock -motor (dont know if it works)also apron with Ali gear cover and sadlle.  Pan and back splash gaurd also.

My wife insists I put it on Ebay because I got the bigger lathe as a project now-#If anybody is interested I would rather it go to a Madmodder as well.

Any offers part or all of it.
Gerhard

Darren:
I wouldn't mind the headstock, do you have the spindle with it? what's a metal master?

matnewsholme:
darren

I'd guess the metal master bit is in reference to the two gears inside the headstock which are plastic from the factory and break. you can get aftermarket metal replacement ones.

matt

Darren:
Ah, gotcha .....  :thumbup:

Gerhard Olivier:
Sorry yes darren the spindle is in the headstock and the big gear has been replaced with metal one the smaller is still plastic- ill put up a picture if u want.

Gerhard

Navigation

[0] Message Index

[#] Next page