« previous next »
Pages: [1]   Go Down

Author Topic: replacement clutch selector on a clm500 combi lathe/mill  (Read 5031 times)

Offline PhiberOptix

  • Jr. Member
  • **
  • Posts: 22
  • Adapt Improvise and Overcome
replacement clutch selector on a clm500 combi lathe/mill
« on: October 05, 2009, 02:08:08 PM »
Disaster the plastic clutch selector broke


so had to make a new one this time from mild steel

drilled out the bulk of it


bored out and knurled


Drilling the screw holes in a dividing head


countersinking the screw holes


and fitted back on and packed with grease


now I can use my machine again ;)
Logged
Adapt Improvise and Overcome

SKYPE - GrimsbyDragons

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: replacement clutch selector on a clm500 combi lathe/mill
« Reply #1 on: October 05, 2009, 02:32:48 PM »
Isn't it great when you can fix your own machines ......  :clap:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline PhiberOptix

  • Jr. Member
  • **
  • Posts: 22
  • Adapt Improvise and Overcome
Re: replacement clutch selector on a clm500 combi lathe/mill
« Reply #2 on: October 05, 2009, 02:39:05 PM »
Quote from: Darren on October 05, 2009, 02:32:48 PM
Isn't it great when you can fix your own machines ......  :clap:


I was gutted when it happened as without it I could not use my machine
not even to make a replacement
but luckily enough my m8 has a full engineering workshop
so was able to go over to his an make a new one

Logged
Adapt Improvise and Overcome

SKYPE - GrimsbyDragons

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: replacement clutch selector on a clm500 combi lathe/mill
« Reply #3 on: October 05, 2009, 02:52:58 PM »
Nice fix  :thumbup:

and well done  :beer:

CC
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: replacement clutch selector on a clm500 combi lathe/mill
« Reply #4 on: October 05, 2009, 02:53:22 PM »
Good repair Andy

I've got a 3 in 1 I may just make myself a spare one of those before I'm left without a machine

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire
Pages: [1]   Go Up
« previous next »