| Gallery, Projects and General > Project Logs |
| Project-itus Overdose |
| (1/1) |
| PhiberOptix:
Sorry its been a while but ive been busy with a serious case of projectitus Angle plate 2 plates welded together with webs (Thank You Rob) milling the faces true QCTP Made this a couple of days ago works a treat tool holders made these after the QCTP Gear holder (got sick of finding the right cog in the box, this way they are kept in order) cutting tool height set tool/guage tap wrench (copied from some one elses idea) mandrill handle tail stock tool tidy Making a Jig to bend the pistons for an elbow engine Milling in a slot with a ball nose cutter the same size as the pistons My m8 got hold of my phone and photographed me, here i am milling on his XYZ 4000 CNC machine MIlling out the corner of the jig First Piston in the jig and held in place in a vice ready for heating Heating up the piston ready for bending piston bent and clamped while it cooled the finished piston three finished pistons |
| dsquire:
PhiberOptix Boy, you have been busy for the last few days. Looks like lots of helpful accesories you have made there. :ddb: :ddb: Cheers :beer: Don |
| sbwhart:
My word you've nocked some good stuff out there :thumbup: like the gear tidy thats on my list :headbang: And its looks like you've got the use of a real nice mill. Thanks for showing Stew |
| Navigation |
| Message Index |