The Shop > Tools

Tool Post Grinder

<< < (15/19) > >>

sbwhart:
Wow what quick delivery

Ordered a set of pin chucks from Axminster yesterday lunch time, came in from the shop today to have some lunch and look what was on the door mat



 :D :D :D

Stew

sbwhart:
Ok after the desaster with the Dremel chuck, had a go making a grinding point chuck using a pin chuck as suggested by John.

Make another quil this time I drilled it out 9mm



Then get rid of the parts of the pin chuck not wanted.



Then grip a bit of 1/8" silver steel good and tight with the pin chuck, then gripping the silver steel with an ER collet gently turn the end down to 9mm + 0.20mm, then gently flash down to size with the tool post grinder so that it fits nicly in the quill.



Then supper glue the pin holder in the quill and thats it job done, the points run dead true. :thumbup:



Well pleased with the result 1000 times better than dremil chuck.

Cheers

Stew

bogstandard:
"Super glue", he says in a high pitched voice.

I told you to use hi strength loctite.

I told you it should work better than that grotty chuck.


BTW. This message is now being sent with my all singing, all dancing, new desktop computer.

From a bare bones box, to being on the net, 1.5 hours.

Bogs

sbwhart:
When I was gluing it I thought Supper glue or loctite one of them is brittle  :scratch: which one did John say:- eene, meeni, mine, mo and I got the wrong one  :doh:.

 :lol: :lol:

Happy new computer John  :thumbup:

Stew

NickG:
That's great Stew, you'll be able to do all sorts of stuff with that.

Nick

Navigation

[0] Message Index

[#] Next page

[*] Previous page