The Shop > Tools

Tool Post Grinder

<< < (9/19) > >>

Bluechip:
Stew

Does it matter?

If the grinder wheel is going opposite to mandrel, just add the two surface speeds, ??

Why should it go clockwise ??

Or have I missed something ??

Dave BC

bogstandard:
As you can reverse the rotation of your chuck Stew, that should make no difference to you.

For external grinding, run the chuck in reverse, for internal, normal rotation, opposite to normal method.

The only thing to keep an eye on is the nuts or chuck that hold the wheels, they would need to be left hand threads.


Bogs

Darren:
Reading between the lines here, it seems it would not be a good idea to reverse the router ...... or the chuck might/would come undone .....   :zap:

CrewCab:
Nice find Stew  :thumbup: .............. as for the switch it's simple enough I had the same on a router I fixed to a table. I just bypassed the dead man switch and used an in line on off one, though mine went on the wall, your a little more limited  :smart:

As for rotation can you use a figure of 8 belt, probably need to offset the pulley a little.

CC

Darren:
Thinking about it a little more I guess you are not using the routers chuck, so it probably wouldn't matter if you reversed it anyway .... confused meself now .. :doh:

Navigation

[0] Message Index

[#] Next page

[*] Previous page