Home Base > Introductions

G'day from Sydney

(1/3) > >>

tumutbound:
Another new Oz member saying hello.
I have a C6 lathe and an X2 mill and hope to actually make something real soon.
Current project is to get some DRO scales mounted on the mill.

bogstandard:
Welcome Geoff,

Another Commonwealth member joins the fold. It must be driving Bernd mad.

You have a good start with your equipment, and I am sure everyone on here can give you suggestions what to do with it (not painful I hope).

Just settle down, do a bit of reading, then push your way in when you can find a space.


Bogs

tumutbound:
Thanks Bogs,
I'll start reading and looking for an interesting project to cut my teeth on.

Darren:
Welcome, to the club. if you've made anything yet can we see it.... :thumbup:

tumutbound:
The only thing I've 'made' so far has been to mount a QCTP on the lathe.
This required boring out the body of the new tool post and making a sleeve to fit over the exiting mounting bolt.
There are a couple of piccies on my website

Navigation

[0] Message Index

[#] Next page