| Home Base > Introductions |
| G'day from Sydney |
| (1/3) > >> |
| tumutbound:
Another new Oz member saying hello. I have a C6 lathe and an X2 mill and hope to actually make something real soon. Current project is to get some DRO scales mounted on the mill. |
| bogstandard:
Welcome Geoff, Another Commonwealth member joins the fold. It must be driving Bernd mad. You have a good start with your equipment, and I am sure everyone on here can give you suggestions what to do with it (not painful I hope). Just settle down, do a bit of reading, then push your way in when you can find a space. Bogs |
| tumutbound:
Thanks Bogs, I'll start reading and looking for an interesting project to cut my teeth on. |
| Darren:
Welcome, to the club. if you've made anything yet can we see it.... :thumbup: |
| tumutbound:
The only thing I've 'made' so far has been to mount a QCTP on the lathe. This required boring out the body of the new tool post and making a sleeve to fit over the exiting mounting bolt. There are a couple of piccies on my website |
| Navigation |
| Message Index |
| Next page |