| Gallery, Projects and General > Project Logs |
| QCTP for my Stanko 1A616 from 1962 ... |
| << < (2/7) > >> |
| raynerd:
That is one hell of a block of steel!!! I`m making one of these as well - dovetails are proving problematic but I think I`m getting somewhere tonight! Get plenty of photo`s of your build. Chris |
| ksor:
Bernd: Yes it has cooliant on the blade - lots of cooliant ! |
| John Hill:
Ksor, I have a HSS blade saw too but it turns very slowly, maybe 50RPM, I wonder if it has the wrong motor and should be turning faster? |
| ksor:
John Hill: I don't think so - my saw has a 2-speed motor so the blade - I think - is running about 40 and 100 RPM ! |
| websterz:
--- Quote from: John Hill on September 16, 2009, 04:48:41 PM ---Ksor, I have a HSS blade saw too but it turns very slowly, maybe 50RPM, I wonder if it has the wrong motor and should be turning faster? --- End quote --- Nope. you definitely want a coldsaw to run slow. :thumbup: |
| Navigation |
| Message Index |
| Next page |
| Previous page |