The Breakroom > Resources

For all your digivern wants

(1/1)

bogstandard:
Machine DRO also do a very wide range of digital verniers, not usually available anywhere else, plus all those other measuring tools and bits that you have trouble getting hold of.

This is the page for the catalogue download, you will require adobe reader.

http://www.allendale-stores.co.uk/dro/info/machine%20dro%20catalogue.pdf

Plus there is a chart on there for Darren to look at, that shows the difference in specs between the budget and universal DRO display heads.


Bogs

Darren:
Aldis have digital verniers in again from the 24th Sept. 6" ones this time with full digits too.

£8.99

bogstandard:
Thanks Darren,

Time to stock up.

John

Darren:
I'm going to put some on the lathe and mill....the lathe prob semi-permanently and the mill just for small intricate work. A sort of drop in and use as and when.

I realise they won't be as good as a proper DRO, but better than nothing for now.

bogstandard:
Someone the other day was asking where to get a fractional digivern, and I can't find the post it was in.

So here is one in the UK. From the same suppliers I put a link to above.


http://www.machine-dro.co.uk/index.php?target=products&product_id=79


Bogs

Navigation

[0] Message Index