« previous next »
Pages: [1]   Go Down

Author Topic: Led lamps at Argos  (Read 11487 times)

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Led lamps at Argos
« on: October 08, 2009, 05:16:34 PM »
Hi all, A friend of mine showed me a 12volt gooseneck LED lamp that he purchased from Argos. He uses it on his milling machine, I must admit I was impressed how much light this little lamp knocks out  :bugeye:, best of all its only £11.99! :clap: So anyway I bought one and fitted it to my little capstan lathe, the lamp has a 44cm metal gooseneck connected to a very strong bulldog clip, So i just clipped it on to the machines rear splash guard and hey presto a cheap machine light!  :thumbup:





Its got a built in on/off switch on the nice long cable and is supplied with a 12 volt mains transformer.
Argos Item no. 432/5750

 :mmr:

Rob
Logged

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Led lamps at Argos
« Reply #1 on: October 08, 2009, 05:20:31 PM »
Looks useful. Does it come with a transformer?

Andy
Logged
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: Led lamps at Argos
« Reply #2 on: October 08, 2009, 05:25:16 PM »
Hi Andy, Yep it comes with a transformer, the cable from the lamp just plugs straight in!  :beer:
( no affiliation other than customer)


Rob
« Last Edit: October 08, 2009, 05:39:54 PM by slowcoach »
Logged

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Led lamps at Argos
« Reply #3 on: October 08, 2009, 06:50:41 PM »
Nice lamp, I might get one of those .....  :thumbup:

What's the lathe?
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: Led lamps at Argos
« Reply #4 on: October 09, 2009, 07:20:39 AM »
Hi Darren,

Its a 5" Raglan Capstan lathe. I use it to knock off the odd batch of axles and bushes for steam/diesel loco's. Set it up and off you go! It can be also used as a conventional lathe which is a bonus. If i feel really lazy, I can engage the auto feed to the capstan unit and it will do most of the work for me  :thumbup: She spent most of her life in a dark corner of a technical college classroom  :( until i rescued her  :D

Rob
Logged

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Led lamps at Argos
« Reply #5 on: October 09, 2009, 07:28:05 AM »
Hi Rob, I have a capstan hence my interest, thanks for the reply.

I've seen Raglans but never a capstan ....  :thumbup:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: Led lamps at Argos
« Reply #6 on: October 09, 2009, 07:43:34 AM »
Darren,

I wouldn't be without it, its a very useful piece of kit. Now i have finally figured out how to work my camera, I will post some pix of it on the Our Shop thread.

 :beer:
Rob
Logged

Offline colin563

  • Jr. Member
  • **
  • Posts: 88
Re: Led lamps at Argos
« Reply #7 on: October 09, 2009, 10:18:30 AM »
thanks for the tip got mine this morning

drill and fitted it to splashback




thanks colin
Logged

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: Led lamps at Argos
« Reply #8 on: October 09, 2009, 12:51:12 PM »
Nice work Colin  :clap:. Good aren't they?  :thumbup:

Rob
Logged
Pages: [1]   Go Up
« previous next »