« previous next »
Pages: [1]   Go Down

Author Topic: i've been inspired!!  (Read 5277 times)

Offline jim

  • Sr. Member
  • ****
  • Posts: 441
  • Country: 00
i've been inspired!!
« on: September 03, 2009, 02:53:37 PM »
having read a few of the topics on here i've been inspired to get back on track!!

i used to make all my own kit, but of late i've bought quite a lot of stuff i could have made, some of which i've had to improve/re make!
ive got some kit i made 27 years ago and it still works as good as the day it was made :bugeye:

i'm making a tapping guide this weekend, simple design and just what i need (i have an inability to tap a straight hole :()

i'll post pics when i've done, good or bad and successful or not :doh:

Logged
if i'd thought it through, i'd have never tried it

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2911
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: i've been inspired!!
« Reply #1 on: September 03, 2009, 03:36:05 PM »
Look forward to it ... please post plenty of pics because  :worthless:

I`m going to need to make one after the rest of the jobs on my list!
Chris
Logged

Offline shoey51

  • Full Member
  • ***
  • Posts: 214
Re: i've been inspired!!
« Reply #2 on: September 03, 2009, 03:46:24 PM »
  :worthless:

Lots of pics please
I made a small tapping guide after bending and breaking a 10ba tap found the design in a book I have :D
Logged

Offline jim

  • Sr. Member
  • ****
  • Posts: 441
  • Country: 00
Re: i've been inspired!!
« Reply #3 on: September 03, 2009, 03:54:02 PM »
Quote from: shoey51 on September 03, 2009, 03:46:24 PM
  :worthless:

Lots of pics please
I made a small tapping guide after bending and breaking a 10ba tap found the design in a book I have :D

i've "designed" something to fit in a drill chuck so the tap follows the hole perfectly, i'll be able to use it in both the lathe and the mill.

thems brave words :)
Logged
if i'd thought it through, i'd have never tried it
Pages: [1]   Go Up
« previous next »